Courses OverviewLevel 1 : Basic IntroductionKey Subject AreasInsulation Boarding
EWI Render overviewSystem AccreditationAll SystemsRequirementsNo...
Designed to prevent cracking to render through thermal expansion and compression. Must be used over a structural movement joint once settling is complete.
Designed to provide a stop to the render just above the damp proof course and above reveals in order to produce a straight edge, provide protection against...
Envirobed Polymer Adhesive Mortar uses innovative cement polymer technology, blended and formulated with high quality aggregates and chemical modifiers,...
PVC Stop Beads suit a multitude of skim coat sizes. Made from PVC, they’re easy to use and install, whilst offering great impact resistance. Built for...
Angle beads provide a clean edge of render when butting up to window or door frames, or any other point of termination in the render. Manufactured from...
Supplied in 50m² rolls (50m long by 1m wide) premier glass fibre reinforcement mesh is used to add extra strength and impact resistance to basecoats,...
Full system base beads are used at or above the DPC level to form a horizontal starting point for the insulated render systems.
Slightly different in design...
Benx are proud to announce our latest fully tested, KIWA agreement approved system, the direct fix application for External Wall Insulation System (EWI)...
With Planea, you can design colour-intensive and durable building envelopes, whereby even the combination of different shades can create a real play of...
EnviroSil is a pre-mixed, highly water repellent silicone based through colour textured finish, allowing the façade to maintain its cleanliness via the...
FlexiSil’s acrylic base with silicone enhanced additives gives it the flexibility and extensive colour choice of acrylic with the water repellency and...
Rivets for our Swisspearl, Rockpanel and Alucobond products.
4.5 x 35mm stainless steel low profile screw to face fix to timber battens with a T20 head.
Our 4.8 x 38mm stainless steel low profile screw to face fix to timber battens with a T20 head.
Our in-house fabrication service allows customers to order both building boards and façade panels to exact sizes, reducing construction cutting time,...
Effective on-site extraction of dust and other particulates from our fabrication facility, providing protection and a safe working environment for our...
We recognize that offsite customers operate different processes and have specific batch requirements. We are able to supply fabricated products in pallets...
Our state-of-the-art automated spray paint line allows us to apply our A-1 fire-rated coatings to Supertech Weatherboard.
A fully integrated fabrication service allows customers to order both building and façades to exact size in order to reduce construction time, minimize...
Our highly experienced technical support team provide a comprehensive technical service as standard. We are able to supply customers with bespoke sized...
GWP and ODP ratings of 0
BRE Green Guide Rating A+
Lightweight and easy to cut
Recyclable
Flame retardant
Kingspan Kooltherm K5 External Wall Board is an external insulation for masonry walls.
A premium performance insulation with a fibre-free rigid thermoset...
Rocksilk EWI Slab Plus is a high strength, rock mineral wool slab with a water repellent additive specifically designed for use in external wall insulation...
Rocksilk® EWI Slab are high performance non-combustible Rock Mineral Wool slabs manufactured with a water repellent additive, and are designed for use...
Expandable polystyrene boards are used as part of a render system to provide an efficient and cost effective solution. Its versatility enable it to be...
Kingspan Kooltherm® K15 is a premium performance insulation with a fibre-free rigid thermoset phenolic core, faced on both sides with a low emissivity...
Rocksilk® RainScreen Slab is a BBA certified Rock Mineral Wool slab designed for use as sheathing insulation in rainscreen façade systems in all buildings...
Mineral Wool Insulation for use in Rainscreen Cladding SystemsManufactured using Dual Density technology, the outer surface of each slab features a distinctly...
External Wall HD Slab is a stone wool insulation specifically developed for use in external wall insulation systems where a higher density slab required.
Mineral wool insulation for EWI Applications
Rockwool External Wall Dual Density Slabs are a premium insulation board composed of mineral wool, which is...
Foil faced Rockwool stone wool fire and smoke barrier for all cavity walls and curtain walls, horizontal and vertical use. AIM Wall Cavity Fire Barrier...
Concealed horizontal fixing for hooking-in facade elements. Designed for the efficient mounting of ACM cassettes.
Technical Features and BenefitsHigh...
This rivet-fix system is designed for horizontal fixings on beam and column constructions.
Technical Features and BenefitsHigh bearing capacity due to...
Nullifire FV060 Ventilated Facade Cavity Closer, a fire barrier for use within rain screen cladding systems that maintains fire integrity for up to 60...
A specialist vertical mount system utilising clips for stone or ceramic panels.
Technical Features and BenefitsWind pressure is passed right to the building...
To suit up to 25mm cavities.
The 102/25 Ventilated Fire Barriers are high expansion intumescent seals offering industry leading performance as Ventilated...
The Tenmat 102/50 is designed for use within cavities of up to 50mm and once installed will close the remaining free air gap in front of the 6mm cavity...
F1-10 Technical Features and Benefits .Wind pressure is passed right to the building element – no tensile load on the dowel.
Each F1 can be used for...
Concealed fixing for hooking in façade elements designed for the efficient mounting of ACM cassettes.
Technical Features and BenefitsWind pressure is...
Hanger elements are put into the undercut drill hole on the back of the panel with special dowels. Each panel is fastened with at least four elements
Technical...
Concealed Fixing System for denser panels such as stone. The fixing system consists of F1 wall brackets, vertical supporting beams and horizontal agraffe-supporting...
The façade panels can be fastened mechanically and concealed with the help of undercut anchors. Hanger elements are put into the undercut drill hole on...
Open State Cavity Barriers offer an effective fire barrier for open state voids up to 425mm in width. Having been tested to the Association for Specialist...
Open State Cavity Barriers offer an effective fire barrier for open state voids up to 425mm in width. Having been tested to the Association for Specialist...
Open State Cavity Barriers offer an effective fire barrier for open state voids up to 425mm in width. Having been tested to the Association for Specialist...
Open State Cavity Barriers offer an effective fire barrier for open state voids up to 425mm in width. Having been tested to the Association for Specialist...
Cement’in C+G is a lime/cement based reinforcing and levelling basecoat coat used in combination with reinforcement mesh. It is water-repellent and offers...
Slipfast® a fast track, mechanically fixed clay brick slip system, designed to be compatible with modern methods of construction. It is available in two...
Used to provide protection of Supertech™ plank at external corners 3000mm long.
Used to join External symmetrical and asymmetrical corner profiles. 300mm long.
Used to provide a junction at Supertech plank Internal corners 3000mm long.
Supertech™ Aluminium Starter Profile is an accessory for fixing the initial Supertech plank in a cladding installation. The starter profile covers the...
Finishing profile where the end batten needs to be covered to provide a neat finish.
End Profile 65 for Benx Supertech™ Plank3000m long x 65mm x 10mm...
End trim to terminate Supertech™ plank into a window reveal or soffit 3000mm long.3000m long x 45mm x 15mm x 8mm
Please note that these trims must...
Designed to allow air to flow through the system whilst protecting against vermin and some insects 3000mm long.
External Corner Bay Profile for Benx Supertech™ Plank
Used to provide a neat finish to the external corners of a bay window.External corner Bay profiles...
Used to provide termination of Supertech plank at internal corners when meeting other finishes 3000mm long.
A universal aluminium trim used to wrap around...
Joint Profile for Benx Supertech Plank
Joint profiles are used vertically to create a clear dividing line between two runs of cladding. This may be to...
OT015 is a high tack adhesive which is used for bonding ME220 Elastomeric EPDM Membrane to itself & to typical construction substrates such as aluminium,...
ME220 EPDM membrane is used for weather sealing the connecting joint between a window or a façade & an adjacent structure, or to provide an internal...
SP025 Fire Membrane Adhesive is chemically neutral and low odour during and after curing. When tested to EN13501-1 with ME010 Façade UV & Fire Membrane,...
ME315 is a special tape with solvent free modified acrylic dispersion adhesive.ME315 is a single-sided adhesive tape for interior and exterior use,...
CompacFoam is a modern construction and insulation material made from mono-material EPS, which combines stability and good heat insulation with very low...
For securing lightweight to medium weight fittings (up to 11kg). These fixings can be used as a retrofit solution after the render is complete. Using an...
For securing lightweight fittings (up to 5kg) to the EWI system after completion of the render. The fixing is designed to work with no pre-drilling, but...
Lipped hammer fixings have a wider flange than normal hammer fixings making them ideal for securing base tracks, stop profiles and TS Rail supports into...
For fixing SPSenvirowall RendaClad boards to timber or metal support battens.
The fixings are coated with a Cliamseal thermoset coating which gives excellent...
This is a two part product that consists of a 5.8mm screw fixing and insulation washer for use when fixing into sheathing boards. It is important to ensure...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head.
These are designed to...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
Metal Pin Masonry Screw Fixing
The TS Rail system is extensively used on lightweight framed structures of either metal or timber and consists of a pre-engineered insulation board that...
RCM FR PRO Silicone Sealant is a one-part silicone sealant formulated to provide a high degree of fire resistance in a variety of joint configurations....
The original aluminium composite material
Alucobond® façades are a BBA approved composite panel ACM suitable for a number of applications.
Aluminium...
By combining vapour permeability and airtightness in a unique, self-adhering membrane, Wraptite offers a fast and effective solution to unplanned air leakage...
Made from powder coated Galvanised Steel or Stainless Steel, in a choice of mesh or perforated wing, with optional PVC nosing which will provide additional...
ME010 is a water and air tight but vapour permeable polyester based breather membrane – used either as a full façade application or in narrower widths...
Solid Aluminium Cladding provides an A1 classified, non-combustible, high impact resistant solution with exceptional durability and mechanical benefits....
RCM Joint Seal has been designed to create an air tightness seal on RCM’s external sheathing boards. It can also be used independently of RCM products.
RCM...
Intusil is a fire rated silicone sealant which may be used to seal movement joints where a fire rating is required.
Intusil is an atmospheric moisture...
DAFA UV façade is a part of DAFA AirVent System and is a strong, permanent UV-resistant permeable fabric which can be used as a wind barrier in an open,...
DAFA RooFoil 200 is a part of DAFA AirVent Sysetm and is a strong permeable fabric which can be used for both roof decking and wind barriers in a lightweight...
100% comprehensive range for ventilated or permeable roof decking and wind barrier solutions.
DAFA AirVent System is made up of well thought out solutions...
DAFAs sealing tape is a weatherproof and permeable sealing tape that prevents the formation of dry rot and mould in the structure.
DAFAs sealing tape is...
DAFA EPDM High Tack Adhesive is a solvent-based contact adhesive designed specifically for bonding EPDM membranes to approved insulations in addition to...
DAFA House Wrap is used as a wind barrier in a ventilated, light external wall cladding. DAFA House Wrap may only be used behind cladding that is sealed...
Benx supplies EPDM rubber sheeting to your specified measurements for flashing applications, etc. EPDM rubber sheeting can be used for:Rubber skirting...
DAFA double-sided adhesive vapour barrier tape is a part of DAFA AirStop System and is a strong adhesive tape for bonding vapour barrier foils.
DAFA UV tape is a part of DAFA AirStop System and is perfect for taping vapour barriers, roof decking and wind barriers.
DAFA UV tape is a single-sided...
DAFA vapour barrier tape is a part of DAFA AirStop System and is a strong adhesive tape for bonding vapour barrier foils.
DAFA vapour barrier tape for...
DAFA Hi-tack tape is used indoors for bonding of longitudinal and transverse joins in HiFoil moisture-adaptive vapour barrier sheet, andon ply-wood, chipboard,...
FlexiSil Primer is vapour-permeable, highly adhesive, polymer-modified and highly weather resistant. Used as a primer over basecoat in conjunction with...
EnviroSil (Granosil’ plus STF) Silicone Primer is water vapour permeant, non-swelling, low stress, non-film forming and environmentally friendly. Used...
EnviroCryl (Granol’ plus STG) Acrylic Primer is water vapour permeant, non-swelling, low stress, non-film forming and environmentally friendly. Used...
A water repellent through colour textured finish offering a low maintenance finish which is waterproof according to VOB, part C, DIN 18363.
EnviroCryl...
Envirobase Basecoat is a pre-mixed ready-to-use material requiring only the addition of clean water.
A cement based ultra-high performance base coat designed...
Envirorend basecoat is a reinforcing and levelling basecoat coat used in combination with reinforcement mesh. Applied directly onto the face of the insulation...
Retrobase basecoat is a polymer modified reinforcing and levelling basecoat coat used in combination with reinforcement mesh.
Vapour permeable, weather...
Mineral wool Insulation is very frequently preferred as an insulation material because of its useful material properties. It is fireproof and does not...
Expanded polystyrene EPS insulation board upgrades the thermal properties of a building, improving U-values, reducing the risk of water penetration and...
Pre compressed expanding sealing tapes are typically used to ensure the water tightness of joints between the insulation system and frames, or any other...
Designed to provide a ventilated cavity behind the insulation system to satisfy NHBC guidelines on framed structures a full range of associated trims are...
Full system stop beads are used as a vertical square edge where ever the insulated render system terminates.
For thick coat render applications a PVC nose...
A standard range of verge trims and window sills are available from stock to suit most insulated render system terminates.
For thick coat render applications...
Full system base beads are used at or above the DPC level to form a horizontal starting point for the insulated render systems.
Slightly different in design...
Used at window heads or similar overhangs to prevent surface rain water travelling under the return.
Made from powder coated Galvanised Steel or Stainless...
Mainly required with traditional thick coat render systems surface mounted expansion beads are used to protect the render from cracking due to thermal...
Termination bead incorporating a reinforcement mesh wing, generally used in thin coat applications.
Apu beads available with removable window protection...
Designed to provide a stop to the render just above the damp proof course and above reveals in order to produce a straight edge, provide protection against...
PVC angle beads incorporating wings made from reinforcement mesh.
Buried within the render system at the surface of the base coat this bead is used to...
Surface mounted angle beads provide a clean straight edge and additional strength at external angles.
Available in a range of sizes and colours, used mainly...
Supplied in 50m² rolls (50m long by 1m wide) Benx glass fibre reinforcement mesh is used to add extra strength and impact resistance to basecoats, both...
For fixing the Benx TS Rail system on NHBC projects using a light weight steel frame wall. Carbon steel self-tapping screws for fixing into sheathing boards....
Wall System 2 enhances thermal efficiency and can dramatically reduce energy bills and the carbon footprint of the building. It has three key benefits:
Protection...
The TKR is a self-tapping carbon steel screw for fixing insulation directly to sheathing boards on light weight steel frame or timber substrates. Must...
For fixing insulation up to 250mm thick into concrete, brick and block. Stainless steel compression anchors. Product is supplied in one piece and is used...
A polyamide 60mm disc washer. Used in conjunction with both the VHT-R and TKR fixings to make a full insulation fixing. Supplied separately.
For insulation boards up to 270mm thick. A polypropylene sleeve with a zinc electroplated carbon steel hammer in pin incorporating a nylon head piece....
For insulation boards up to 310mm thick. A polypropylene sleeve with a zinc electroplated carbon steel screw incorporating a nylon head piece with a TORX...
For insulation boards up to 190mm thick. A polypropylene sleeve with a nylon hammer in pin, they are typically specified when fixing into masonry substrates,...
Stainless Steel “one piece” tubular bodied hammer in anchor. Typically used in applications where horizontal or vertical fire barriers are...
A steel option for fixing insulation into 0.7-1.2mm steel or timber and cladding boards. The TKR is a drill tipped carbon steel screw with an organic corrosion...
For fixing insulation up to 260mm thick into concrete and brickwork. Polypropylene expansion anchors supplied with zinc plated carbon steel pin for extra...
SPSenvirowall’s Wall System 1 fixed direct to a masonry substrate of either a single skin or cavity construction can incorporate either mineral wool...
For fixing insulation up to 140mm thick into concrete and brickwork. Polypropylene expansion anchors supplied with plastic pins. Different lengths are...
External wall insulation systems are extensively used on lightweight framed structures and direct-fix projects. The speed at which they can be erected...
EnviroDash is a high polymer modified through colour dashing receiver which is available in an extensive range of colours which work in conjunction with...
EnviroBrick is an attractive brick effect render, consisting of a cement-based through colour render, requiring only the addition of water. It provides...
The BrickStick system offers the flexibility of a brick slip system with the traditional look, durability and feel of real brick work. Developed to complement...
SpeedySlip provides the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish....
Enviromin is a high-performance, cement based and polymer modified through coloured mineral thin coat render and is based on a colour fast lime bloom free...
Cavity systems are extensively used on lightweight framed structures to create a void between the cladding and the sheathed framed structure. Our CS systems...
Cavity systems are extensively used on lightweight framed structures to create a void between the cladding and the sheathed framed structure. SPSE CS systems...
RendaClad has primarily been developed to provide a seamless rendered rainscreen system to an LSF or timber framed structure.
RendaClad replaces the need...
RCM are proud to be the UK distributor for Allface Smart Fixing Systems, a global specialist in the provision of support systems for adjustable rainscreen...
Freedom of design without limits.KIWA and BBA approved, Swisspearl coloured fibre cement panels give façades what they need: a face, individuality,...
Realise your vision with Rockpanel.Manufactured using compressed natural basalt (a readily available volcanic rock) bonded together with an organic...
Fire rated calcium silicate boardRCM Siltech is a non-combustible flexible calcium silicate building board which provides superior workability due to...
DensGlass – The Gold Standard in A1 Rated Sheathing Boards, now BBA Certified.
DensGlass Sheathing is a high performance, A1 Fire Rated sheathing...
High performance dimensionally stable render carrier boardRCM Renderflex is a high-performance cellulose fibre cement building board, offering excellent...
High-performance cement bonded particle building boardRCM Cemboard is a rigid, medium density, high-performance cement bonded particle building board...
RCM Multipurpose – A1 non-combustible, cellulose fibre cement board
RCM Multipurpose is a highly versatile cellulose fibre cement building board,...
A1 non-combustible, BBA certified calcium silicate cement building boardRCM Y-wall is a high-quality flexible calcium silicate cement based building...
Façades designed to stand the test of time
Supertech Weatherboard is a simple to install, fully ventilated rainscreen cladding system which has an appearance...