For fixing insulation up to 260mm thick into concrete and brickwork. Polypropylene expansion anchors supplied with zinc plated carbon steel pin for extra...
A steel option for fixing insulation into 0.7-1.2mm steel or timber and cladding boards. The TKR is a drill tipped carbon steel screw with an organic corrosion...
Intusil is a fire rated silicone sealant which may be used to seal movement joints where a fire rating is required.
Intusil is an atmospheric moisture...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
A polyamide 60mm disc washer. Used in conjunction with both the VHT-R and TKR fixings to make a full insulation fixing. Supplied separately.
RCM Joint Seal has been designed to create an air tightness seal on RCM’s external sheathing boards. It can also be used independently of RCM products.
RCM...
For insulation boards up to 190mm thick. A polypropylene sleeve with a nylon hammer in pin, they are typically specified when fixing into masonry substrates,...
Kingspan Kooltherm K5 External Wall Board is an external insulation for masonry walls.
A premium performance insulation with a fibre-free rigid thermoset...
Kingspan Kooltherm® K15 is a premium performance insulation with a fibre-free rigid thermoset phenolic core, faced on both sides with a low emissivity...
Rocksilk® EWI Slab are high performance non-combustible Rock Mineral Wool slabs manufactured with a water repellent additive, and are designed for use...
Rocksilk EWI Slab Plus is a high strength, rock mineral wool slab with a water repellent additive specifically designed for use in external wall insulation...
Rocksilk® RainScreen Slab is a BBA certified Rock Mineral Wool slab designed for use as sheathing insulation in rainscreen façade systems in all buildings...
Expandable polystyrene boards are used as part of a render system to provide an efficient and cost effective solution. Its versatility enable it to be...
Lipped hammer fixings have a wider flange than normal hammer fixings making them ideal for securing base tracks, stop profiles and TS Rail supports into...
PVC angle beads incorporating wings made from reinforcement mesh.
Buried within the render system at the surface of the base coat this bead is used to...