The TKR is a self-tapping carbon steel screw for fixing insulation directly to sheathing boards on light weight steel frame or timber substrates. Must...
Stainless Steel “one piece” tubular bodied hammer in anchor. Typically used in applications where horizontal or vertical fire barriers are...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
A polyamide 60mm disc washer. Used in conjunction with both the VHT-R and TKR fixings to make a full insulation fixing. Supplied separately.
For insulation boards up to 190mm thick. A polypropylene sleeve with a nylon hammer in pin, they are typically specified when fixing into masonry substrates,...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head.
These are designed to...
Designed to provide a ventilated cavity behind the insulation system to satisfy NHBC guidelines on framed structures a full range of associated trims are...
For securing lightweight fittings (up to 5kg) to the EWI system after completion of the render. The fixing is designed to work with no pre-drilling, but...
Metal Pin Masonry Screw Fixing
For insulation boards up to 270mm thick. A polypropylene sleeve with a zinc electroplated carbon steel hammer in pin incorporating a nylon head piece....
For insulation boards up to 310mm thick. A polypropylene sleeve with a zinc electroplated carbon steel screw incorporating a nylon head piece with a TORX...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
This is a two part product that consists of a 5.8mm screw fixing and insulation washer for use when fixing into sheathing boards. It is important to ensure...