The new Premier Inn is a new 168 bedroomed hotel and part of the 4.7 acre, mixed-use Finzels Reach development in the heart of Bristol, delivered by main contractor RGB Group in April 2017.
Award winning specialist cladding contractor Build-Therm carried out the installation of external wall insulation and cladding after being awarded the work by the National Construction and Development Company, RGB.
The client desired a traditional brick façade with a columned appearance, typical of all modern, high-rise Premier Inn Hotels whilst being aesthetically sympathetic to its local surroundings where several grade II listed buildings reside, blending historic buildings with contemporary architecture.
With such a small development area, facilities for storage and deliveries were limited. To achieve a traditional brick façade would have been costly and time consuming. With this in mind, SPSenvirowall specified its Wall System 1, a solution which utilised insulation with a flexible brick finish to provide the client with the desired look.
Build-Therm were able to utilise over 2000m2 of SPSenvirowall white eps insulation ranging from 150mm to 300mm which assisted in the construction of the stepped appearance on the build whilst using the SPSenvirowall Staffordshire blue and red flexible brick slips to provide the traditional brick façade.
The use of SPSenvirowall’s Wall System 1 and flexible brick slips allowed the development to be delivered on time and to budget, the system is lightweight and well suited to the steel frame building while saving time on deliveries and requiring less physical space in which to store the building materials which would have been problematic with a traditional brick.
With a U-value calculation of 0.14W/m2K and 0.11W/m2K, the new build development is energy efficient, while the client was able to achieve the desired traditional brick façade. The SPSenvirowall Wall System 1 insulation and flexible brick cladding solution was able to fulfill these criteria.