For insulation boards up to 190mm thick. A polypropylene sleeve with a nylon hammer in pin, they are typically specified when fixing into masonry substrates,...
Fixings for EWI
Mechanical fixings or anchors play an important function in the way in which External Wall Insulation Systems perform
under building and dynamic loadings. The role of the fixing is far greater than simply holding the insulation in place
until the render is applied, it has to accommodate movement within the structure, positive and negative wind pressure
and supporting the self-weight of the system to name a few key functions.
Benx is proud to supply the following fixings within its range, for further advice, please contact the Benx technical team.
Lipped hammer fixings have a wider flange than normal hammer fixings making them ideal for securing base tracks, stop profiles and TS Rail supports into...
For insulation boards up to 270mm thick. A polypropylene sleeve with a zinc electroplated carbon steel hammer in pin incorporating a nylon head piece....
For insulation boards up to 310mm thick. A polypropylene sleeve with a zinc electroplated carbon steel screw incorporating a nylon head piece with a TORX...
For fixing the Benx TS Rail system on NHBC projects using a light weight steel frame wall. Carbon steel self-tapping screws for fixing into sheathing boards.
For fixing insulation up to 450mm thick typically into No Fines concrete, but can also be used into concrete, brick and block. Polypropylene expansion...
For fixing insulation boards up to a thickness of 220mm into variable substrates due its pin having a screw type application. The plastic centre fixing...
For fixing insulation up to 200mm thick into concrete, brick and block.
Polypropylene expansion anchors supplied with polyamide pins.
Product is supplied...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
Metal Pin Masonry Screw Fixing
The TKR is a self-tapping carbon steel screw for fixing insulation directly to sheathing boards on light weight steel frame or timber substrates. Must...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head.
These are designed to...
Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head. These are designed to...
For fixing the Benx TS Rail system on NHBC projects using a light weight steel frame wall. Carbon steel self-tapping screws for fixing into sheathing boards....
For fixing SPSenvirowall RendaClad boards to timber or metal support battens.
The fixings are coated with a Cliamseal thermoset coating which gives excellent...
For securing lightweight fittings (up to 5kg) to the EWI system after completion of the render. The fixing is designed to work with no pre-drilling, but...
Stainless Steel “one piece” tubular bodied hammer in anchor. Typically used in applications where horizontal or vertical fire barriers are...
CompacFoam is a modern construction and insulation material made from mono-material EPS, which combines stability and good heat insulation with very low...